Skip to content
Spectoda Documentation

T-LED LED signal amplifiers

Partner accessory family for analog LED strips in Spectoda installations. Includes AMP BV1, AMP BV4 RGBW, and AMP BV5 RGBCCT variants.

T-LED AMP BV4

Description

The T-LED AMP amplifier family is used in Spectoda installations as a partner accessory family for analog LED strips and LED modules. It is used where a Spectoda control element handles logic and synchronization, but the LED load itself requires a separate power branch.

Unlike Spectoda controllers, this is not an intelligent network element:

  • it does not add wireless communication,
  • it does not contain Spectoda firmware,
  • it only receives the PWM control signal and amplifies the power section for another LED load segment.

When to use it

  • When you need to extend an analog LED strip beyond the recommended load of the control element.
  • When you want to keep unified control across several segments while splitting power into multiple powered branches.
  • When you need a separately powered RGBW or RGBCCT section that should continue following the same control signal.

Product variants

AMP BV1

T-LED AMP BV1

Single-channel amplifier for single-color LED strips and LED modules.

Basic parameters

  • Input voltage: 5-24 VDC
  • Maximum load: 30 A
  • Power according to partner manual: 360 W at 12 VDC, 360 W at 24 VDC
  • Dimensions: 140 x 75 x 26 mm
  • Weight: 115 g
  • Protection rating: IP20

Typical use in a Spectoda installation

  • Power extension for a longer single-color LED strip.
  • Splitting one branch into multiple separately powered sections while keeping the same control.

Design and wiring recommendations

  • Verify common conductor compatibility, polarity, and channel mapping against the control element.
  • Do not connect the outputs of individual channels to each other.
  • Design each power branch according to the actual supply and current, not as a combined power sum with the control element.
  • Have the installation performed by a qualified person and follow the partner manual for the specific variant.

Integration in the Spectoda ecosystem

This family makes sense wherever Spectoda handles control, logic, and synchronization while T-LED AMP handles only power extension of the analog LED branch.

It is typically used:

  • after a compatible PWM controller for analog LED strips,
  • in longer lines or multiple segments of one lighting scene,
  • where the LED load needs to be split into multiple physical branches.

Documentation

Spectoda - T-LED AMP Family Datasheet [PDF]

T-LED AMP BV1 - User manual [PDF]

T-LED AMP BV4 RGBW - User manual [PDF]

T-LED AMP BV5 RGBCCT - User manual [PDF]

Compliance and responsibility for materials

Hardware in this family is manufactured by T-LED. Publicly available partner documentation includes user manuals, basic technical parameters, and safety notices.

We did not find a separate CE/RoHS declaration on the partner’s public product pages as of 2026-04-22. If this family is to be included in formal project documentation or a customer compliance package, we recommend requesting the official declaration directly from the supplier.

Note on power figures

For technical limits in this overview, we use values from partner PDF manuals. For the AMP BV4 variant, we therefore rely on the partner manual (40 A, 24 VDC / 960 W), not on a marketing example from the product page.