Use examples

Practical use examples for SC Industry A6

This page shows typical scenarios where SC Industry A6 from the SC Industry A line makes the most sense. It is a controller for DALI luminaire control with up to 16 drivers on one DALI line, optional expansion modules such as Phase Input, Daylight, or RTC, and the advantage of a wireless mesh network.

For general DALI context in the Spectoda ecosystem, continue with the DALI page.

Scenario map

1) Production hall / warehouse

zoning, savings, safety

2) Administrative spaces / open space

daylight compensation, scenes

3) Corridors, staircases, and back-of-house areas

motion, night dimming

4) Sports facilities

quick modes

5) School / classrooms

simple control + automation

6) Retrofit

modernization without new cabling

7) Remote management

service, reporting

Quick checklist: what these scenarios usually include

In practice, an installation with SC Industry A6 most often consists of:

DALI luminaires/drivers by segment or zone
SC Industry A6 with one controller per DALI segment or according to project design
sensors for motion/presence and ambient light intensity, connected directly or wirelessly within the mesh
controllers/scenes through the app, buttons, or a wall panel
optional Spectoda Gateway for remote functions

Scenario 1: production hall / warehouse - zoning, savings, and safety

Goal: light only where work is actually happening while maintaining a safety minimum.

Typical solution:

Divide the hall into zones such as aisles, production lines, packing, and dispatch.
Each zone is controlled by one or more SC Industry A6 controllers over DALI.
Motion/presence sensors, for example PIR sensors, trigger automation across the network.

Example behavior:

Presence in a zone -> lights in the zone at 100%.
No motion for X minutes -> lights dim to standby level, for example 10-20%.
Night mode -> keep only an orientation light level.
Daylight compensation -> automatically reduce artificial lighting when daylight is sufficient.

Benefits in a hall or warehouse:

Energy savings by lighting only zones that are actually in use.
Safer operation through automatic light-up in aisles, ramps, and work areas.
Fast adaptation to layout changes such as racks or lines without wiring changes.
Lower service costs thanks to better diagnostics and clearly defined zone behavior.

Scenario 2: administrative spaces / open space - daylight compensation and scenes

Goal: stable lighting at workstations, scenes for different work modes, and reduced glare.

Typical solution:

DALI luminaire control by zone, for example windows vs. room center.
Daylight sensor for automatic intensity balancing.
Scene control from the app or a wall panel, for example TX Ultimate powered by Spectoda.

Example scenes:

“Work” for a standard light level
“Presentation” for dimming the zone near a projector
“Cleaning” for full output

Benefits in an office:

Comfort and productivity through a stable light level and easy scenes.
Savings through daylight compensation, where the window zone automatically uses less artificial light.
Less disturbance thanks to smooth brightness changes and fewer unnecessary user adjustments.
Easy management when layouts change, such as desk moves or meeting zones.

Scenario 3: corridors, staircases, and back-of-house areas - automatic lighting without overlighting

Goal: provide light only during movement, without unpleasant blinking and with a safe night mode.

Typical solution:

Motion sensors for activation.
Smooth fade-in and fade-out for comfort.
Night dimming, for example 5-15%, which briefly increases during movement.

Benefits in circulation spaces:

Safety through automatic lighting at the right time and place.
Significant savings because corridors often stay lit for longer than needed.
Comfort through smooth fade-in/fade-out without distracting jumps.
Clear operation for users because the light behaves predictably.

Scenario 4: sports facilities - quick mode switching (training / match / cleaning)

Goal: switch quickly between modes and make sure the whole space is set consistently.

Typical solution:

Zones such as playing area, spectator area, and surroundings.
Simple scene control through a button box or SC Button.

Example scenes:

“Training” with lower output
“Match” with full output
“Cleaning” with full output and possibly different zones

Benefits in a sports facility:

Immediate mode switching without complex operation.
Savings because training often does not require match-level output.
Consistency because a scene always sets the whole space the same way.
Simpler operation because staff have only a few buttons and clearly defined modes.

Scenario 5: school / classrooms - automation + simple control for teachers

Goal: give teachers a few understandable modes while the system manages savings automatically.

Typical solution:

Automation based on presence.
Modes/scenes such as teaching, projection, test, and cleaning.
Time behavior such as afternoon dimming or weekend mode.

Planning and modes also relate to time automations.

Benefits in a school:

Simple control with a few modes instead of constant manual dimming.
Savings through automatic switch-off or dimming when no one is present.
Suitable lighting conditions for different situations such as projection, writing, or cleaning.
Fewer operating mistakes because whole classrooms do not stay unnecessarily lit.

Scenario 6: retrofit (modernization without new cabling) - maximum functionality with minimal intervention

Goal: add intelligent control to an existing installation without expensive reconstruction.

Typical solution:

Keep the existing DALI drivers and wiring.
Add SC Industry A6 into the cabinet or ceiling area near the DALI segment.
Connect zones wirelessly into a mesh network.
Keep “classic” inputs through Phase Input where it makes sense.

Benefits in retrofit projects:

Minimal construction work because new wiring is not needed for the new control logic.
Faster delivery and lower impact on building operation.
Gradual modernization by phase or by zone.
Existing controls can remain where it makes sense.

Scenario 7: remote management, service, and reporting for facility / building managers

Goal: diagnose issues quickly, adjust settings, and maintain visibility into operation.

Typical solution:

Deploy Spectoda Gateway.
Use cloud functions described on the cloud services overview page.

For example:

Remote service for fewer site visits
Spectoda Analytics for visibility into behavior and usage

Benefits for facility management:

Fewer site visits and faster incident resolution through remote diagnostics and adjustments.
Better visibility into installation operation and behavior.
Easier optimization because dimming levels, scenes, and timing can be tuned over time based on reality.
Higher operational confidence in larger installations through standardized settings across the building.

Design tips from practice

Zone by real operation, not by wiring. Spectoda can change the logic later as well.
Plan for future layout changes such as moved racks or office partitions. The wireless mesh network makes changes easier.
For scheduled modes such as night dimming or weekends, consider using an RTC module, especially where the installation should keep time even after a power outage.