SC Pixel Pro B
Controller designed for digital LED strips up to 2400 px. It includes outputs for 4 LED strips at 5 V, 12 V, or 24 V. Also available in an IP68 variant.
Description
Section titled “Description”SC Pixel Pro is a robust controller designed specifically for addressable LED strips with up to 2400 pixels on each of its 4 outputs. It is supplied with preprogrammed Spectoda proprietary firmware, so it is fully compatible with other Spectoda-enabled devices.
SC Pixel Pro is controlled wirelessly from Spectoda web applications over Bluetooth Low Energy (BLE), Wi-Fi local area network (WLAN), or WebSocket connections. Devices automatically form a self-healing and self-managing wireless mesh network, so many luminaires can be controlled from anywhere in the installation. An external gateway module is not strictly required.
SC Pixel Pro can connect to 5 V, 12 V, or up to 24 V pixel strips, making it a very versatile controller.
Spectoda lighting control system
Section titled “Spectoda lighting control system”- Wireless control from a Bluetooth smart device
- No external gateway required
- Automatically creates a wireless mesh network
- Device firmware can be updated over the air
- Cloud service available
- Very simple setup
How SC Pixel Pro is used
Section titled “How SC Pixel Pro is used”It can be used in a wide range of projects, including smart lighting, home automation, and interactive art installations. The versatility of the Pixel Pro controller allows it to be adapted to many digital LED strip-based applications.
SC Pixel Pro features
Section titled “SC Pixel Pro features”- Compatible with Bluetooth v4.2 BR/EDR and Bluetooth LE specifications
- Dimensions: 101 mm x 76 mm x 34 mm
- Operation at 5, 12, or 24 V
- Power up to 100, 240, or 480 W respectively
- Range up to 80 m in open space
- Supplied with preinstalled Spectoda firmware
- Built on the ESP32 platform
- Designed for PIXEL LED control
Wiring diagram
Section titled “Wiring diagram”
Applications
Section titled “Applications”- PIXEL LED STRIP controller
- Compact sensor controller
Supported PIXEL LED IC protocol families
Section titled “Supported PIXEL LED IC protocol families”WS2811, WS2812, WS2812B, WS2813, WS2815, Neopixel, SK6812 RGB, SK6812 RGBW, GW6205, UCS1903, UCS1903B, UCS2904, CS8812.
Electrical specifications
Section titled “Electrical specifications”Absolute maximum ratings
Section titled “Absolute maximum ratings”Stress above the absolute maximum ratings listed in the following table may cause permanent damage to the device. These are stress ratings only and do not describe functional operation. Functional operation should follow the recommended operating conditions.
| Parameter | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Voltage applied to power pins for each power domain | 4 | - | 5.5 | V |
| Cumulative IO output current | - | - | 300 | mA |
| Storage temperature | -40 | - | 90 | degC |
Recommended operating conditions
Section titled “Recommended operating conditions”| Parameter | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Voltage applied to the power pin | 4 | 5 | 5.5 | V |
| Current supplied by the external power source | 0.5 | - | - | A |
| Storage temperature | -40 | - | 60 | degC |
Additional information
Section titled “Additional information”More technical data is available from:
SC Pixel Pro B Datasheet 2026.pdf
SC Pixel Pro B - User manual [CZ].pdf